Can I Paint Over Thompson's WaterSeal On Concrete?

You can paint concrete that's been treated with Thompson's WaterSeal if you follow the proper steps. You should not paint over Thompson's WaterSeal Advanced Clear, however. Proper preparation of the concrete and adequate drying times are required before you can start painting.

Step 1

Apply Thompson's WaterSeal to concrete that has cured at least 30 days. Apply the sealant only if the temperature is above 40 degrees and the surface can be protected from moisture, such as rain, for at least 24 hours. Allow the first coat to dry at least 48 hours and test to determine if a second coat is needed. Sprinkle a few drops of water on the concrete. If beads of water form on the concrete it is sealed. If the water is absorbed, producing a dark spot on the concrete, a second coat is required.

Step 1

Apply oil-based paints to concrete treated with Thompson's WaterSeal at least one week after the application of the sealant. Apply latex paints 45 days after the Thompson's WaterSeal application. Follow label instructions from the paint manufacturer concerning application processes, temperatures and cleanup.

Step 2

Step 1

Check the waterproof status of the painted surfaces about once a year. Place a few drops of water on the surface and monitor it for absorption. Beads of water on the surface indicate the concrete is still waterproofed.

Step 1

Apply Thompson's WaterSeal in a well-ventilated area and avoid breathing concentrated vapors or mist from sprayers. Wear proper eye protection and rubber gloves while applying the product. Use a paint thinner or mineral spirits for equipment cleanup. Rinse all equipment with clear running water after the initial cleaning.

Step 2