How To Transform Your Plant Pots To Look Like Stone

Step 1

Wash your plant pots in warm soapy water to remove any traces of soil or plant debris. Scrub lightly with an abrasive cleaning pad if crusty deposits resist your efforts.

Step 2

Rinse the pots with hot water and allow to air dry. Plastic pots can be wiped dry with a soft cloth, but porous pots, such as terra cotta, need air drying to remove all moisture. Place them in the sun for several hours until completely dry.

Step 3

Cover your work area with old newspapers. Set the plant pot in the center of the newspapers.

Step 4

Step 5

Coat the outside of the pot with a clear sealer to prime the material. This seals the surface and prepares it for a good bond. Refer to the manufacturer's recommendations when choosing a sealer for your project.

Step 6

Shake the can of spray paint to mix the paint well. Hold the can 10 to 14 inches from the surface of the plant pot and spray a thin even coat. You can always add a second coat, if you desire more coverage.Two thin coats are preferable to one heavy coat. Repeat the procedure until the entire pot is covered, turning the pot as you go.

Step 7

Step 8

Allow the plant pot to dry to the touch before applying a second coat of paint, if needed.

Step 9

Seal the faux stone finish with a coat of clear sealer once it has dried completely. Allow to dry over night and fill with your favorite plants and display either inside or out.